How to Clean Phone Case | MOFT

How to Clean Phone Case | MOFT

How did our elegant and clean phone cases become so dirty and tattered? As we use our phones every day, they are exposed to many things that can make them dirty, including dust, heat, our own hands, grease, dust, friction, etc. Therefore, the surfaces of the phone case can become yellowed, torn, scratched, or greasy because of constant wear. However, even if your case doesn't show any obvious stains, it is still best to keep your phone case clean from germs, as it may contain as many germs as your sink or a living room floor.

Due to the high demand, there are many types of phone cases available on the market, including leather, silicone, and clear, and each requires a different type of care. In this article, we will talk about how to clean phone case and address your frequently asked questions, such as; How to clean yellowing phone case? How to clean leather phone case? How to clean clear phone cases? etc.

Why Do Phone Cases Get Dirty

Before we go into the subject of how to clean a phone case, we need to discuss why they become dirty in the first place and how to keep them clean. As mentioned before, we use our phones every day, and they are exposed to many things that can make them dirty, including dust, heat, our own hands, grease, dust, and friction.

But, you should also understand why people need the cases in the first place, which is to protect your phone from scratches, dirt, and generally any kind of damage. This is exactly why wear and tear of the phone case is inevitable over time, but you can also get our durable snap case at MOFT to avoid these kind of issues. However, there are a few things you can do to remove stains from your phone case. Continue reading below and learn how to clean different types of cases.

How to Clean a Phone Case

How to Clean Clear Phone Case
Even though different types of phone cases require different cleaning techniques, some basic cleaning techniques can be applied to all types of phone cases if they light stains. Follow the steps below and find out how to clean a lightly stained phone case safely. 

Step 1: Remove Your Phone Case - To ensure that you clean both sides of the case and to avoid soaking your phone with a cleaning solution, remove the case and set your phone aside first. Additionally, removing your phone case will enable you to clean the inside of the case, which probably has a layer of dirt on it.

Step 2: Prepare a Cleaning Solution - Your case's finish could be damaged if you use rough cleaning solutions for cleaning it. You should avoid using ammonia, bleach, or glass cleaners as they may be corrosive and may contain discoloration agents that can cloud or stain your case. Create a gentle cleaning solution by mixing soap with warm water. For deep stains (applies only to silicon cases), you can use alcohol or a baking soda mixture to clean the case; however, check first so that baking soda and alcohol don't damage the case.

Step 3: Clean Your Case - You can start by blowing out any particularly dirty parts and then applying a little pressure while cleaning them with a soft fabric. Clean the inside and outside of the case with a clean cloth, soft fiber, or a toothbrush soaked in your soap mixture. Corners and edges tend to accumulate dirt and dust over time, so pay special attention to those parts.

Step 4: Let It Dry - Drying the case thoroughly is crucial during this process in order to prevent rogue droplets from getting on your phone. Mold and moisture may grow if the leftover liquid is trapped in the small parts of your case. To absorb any extra droplets, let your case air out in a dry, well-ventilated area or wipe it down with a soft and dry cloth. 

How to Clean Silicone Phone Case

How to Clean Silicone Phone Case
Using dish soap and water is the best way to clean silicone phone cases. Soak your phone case in soapy water for a few minutes. To keep the case submerged, you may need to place something heavy on it. Get a toothbrush, soak it in your solution, and gently scrub the case to remove stains and clean the edges.

When you encounter particularly bad stains, you can add baking soda and use it as a cleaning solution. After scrubbing the phone case for a while, wash it in cold water to remove all dirt. You can even use this method on clear plastic phone cases.

Once the excess water has been evaporated, you can dry it with a microfiber cloth to prevent scratching. Allow the case to air dry for a few minutes before placing it back on your phone. However if you are tired of cleaning your cheap phone case, try out our MagSafe Enhanced Snap Case and enjoy its elegant design and durability.

How to Clean Leather Phone Case 

How to Clean Leather Phone Case
The best way to clean leather phone cases is with a mild soapy solution. Distribute the soap evenly on your leather phone case using the cloth, but be careful not to soak it, as it could ruin it. Use a very soft cloth while drying your leather phone case, as coarse fibers can scratch its surface.

Be sure to clean and dry your phone case as gently as possible, using circular motions while rubbing it to ensure that you are not damaging the leather. Avoid using solutions such as alcohol, borax, and baking soda on your leather case since they can alter its look and color.

How to Clean Clear Phone Cases 

How to Clean a Clear Case

In the same way as silicone cases, clear phone cases can be cleaned with dish soap and water. Here is the simplest method of how to clean clear phone cases. Clean the edges of the case with a toothbrush after soaking it in soapy water. Once the clear phone case is cleaned, wipe it down with a soft cloth. If your clear phone case still has stains, moisten the cloth that you are using in the alcohol and wipe the stains again.

Another option is to soak your clear case in borax or baking soda solution for an hour in order to break up the dirt particles. Clear phone cases are especially susceptible to stains. If you still cannot remove all of the dirt, try mixing baking soda with water to make a paste. Allow the paste to dry for a few hours after applying it to your clear case. After that, remove the paste by brushing it away and dry your case. Try this method if you want to clean your clear phone cases thoroughly or buy a new one at MOFT. Our clear Snap Phone Cases are designed to withstand the time and maintain its prior elegance.

How to Clean Yellowing Phone Case 

How to Clean Yellowing Phone Case

One of the worst things about getting a phone case that was once brilliantly clear is seeing it turn into an unattractive yellow color. At one point or another, we've all experienced it. A cheap clear phone case is typically made of silicone, which is an inexpensive and flexible material.

Sadly, these polymers fade as they age and get yellow. The natural process of yellowing is accelerated by excessive exposure to light, chemicals, and heat. Yellowing is more than just a stain; it is a result of material degradation. Unfortunately, you cannot remove yellowing from a phone case. Therefore, if your phone case is yellowed, considering buying a new phone case might be the best option.

Not Able to Clean Your Case? Get a New One!

If none of the above work and your phone case looks yellow, scratched, dirty, and full of stains, it may be time to get an upgrade and buy a totally new phone case. Investing in a high-quality phone case is always a good idea since it protects your expensive gadget from damage and definitely adds style to it. Considering how often you reach for your phone or hold the phone during the day, you want something that fits your lifestyle, and MOFT phone cases are definitely built for that. How to Clean Clear Case
Using a multi-layer in-mold decoration technique, the color of this MagSafe Enhanced Snap Case is layered with a translucent layer on top to never fade. Clear edges allow you to show off your unique style casually. A built-in magnet makes MagSafe accessory stacking secure.

For maximum mobility, attach accessories like our Snap-on Stand & Wallet or Snap Battery Pack. This MOFT's Snap Case supports wireless charging, so you can mount and charge your phone without any hassle of taking a case on and off.

This drop-resistant phone case has a grippy side and an impact-resistant back, allowing it to survive a variety of drops while still being comfortable to hold in one hand. It comes in three colors. There are white and black options to match all design styles, as well as clear and yellow resistance coatings to match your diverse style requirements throughout the day.

Warp Up!

Due to the high demand, there are many types of phone cases available on the market, including leather, silicone, and clear, and each requires a different type of care. In this article, we talked about how to clean phone cases and addressed your frequently asked questions, such as; How to clean yellowing phone case? How to clean leather phone case? How to clean clear phone cases? etc.

Unfortunately, most phone cases can't be cleaned due to stubborn stains, scratches, and overall damage, and the only option is to buy a new high-quality phone case that will withstand the time. This is exactly why we recommend buying a MagSafe-compatible MOFT snap case made from high-quality materials.

RELATED ARTICLES